Today saw the completion of the propshaft install with the epoxy putty sanded and filled as needed, then the area was given a coat of primer to help identifiy any flaws in the finishing. I have added a screen shot of the CAD drawing showing the two propeller shafts...
Articles with the Tag CAD
Propshaft and Stabilisers
Today has been very productive firstly making two stabilising bars and then fitting them, with a little bit of filling and finishing they now look the part. The next job for the day was to fit the two propeller shafts and make the epoxy putty hull fittings, and after...
Hull creation on the CNC machine
The end of February 2016 saw the creation process begin, after all the testing and remodelling of the CAD drawings to improve the cutting process we started to undertake the build. The CNC machine time would take about 9 hours and three cutting bits later we had all the...
CNC Tests
The start of February 2016 saw us do the first tests for creating the hull using my brothers CNC machine and this quick move shows how the cutting process will work, which allowed us to see if there were any flaws in the CAD drawings also allowing us to...
CAD Drawing Begins
January 2016 sees the start of the research process reviewing all the plans and planning out the build process. Towards the end of the month we have 50% of the hull complete as a CAD drawing and has been made using the cross sections from the 1901 drawings. Tests...
Digital Plans Arrive
At the end of 2015 we received digital copies of the 1901 to 1903 drawings, which are works of art in there own rights, and you can even see the changes drawn on the plans and the dates these were made. The plans we are working from are of...